Design Bridges Using Open Bridge - Level 1

[LeeAndro]

Published 12/2022MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHzLanguage: English | Size: 780.04 MB | Duration: 1h 12m​

Learn to model, analyze and design bridges using Bentley Open Bridge

What you'll learn
Bridges theory
Initiating Open Bridge Modler from Open Bridge Designer
Precast Girder 2 Span Straight Bridge Model
Precast Beam 2 Span Straight Bridge Model - Using Wizard

Requirements
The course is from scratch

Description
Level 1 of Bentley Open Bridge is a bner's guide, where we learn the basics of this software. Starting with a short theoretical session, we assume that you have basic know how about bridges, after quick review of some common terms we will get familiar with the interface of Bentley Open Bridge.After brief introduction, we will proceed with an exercise in which we will create Precast Girder 2 Span Straight Bridge Model. In process of making this bridge we will learn multiple procedure like adding a bridge Model, support Lines, bridge Decks, Girders, placing and Modifying Piers, Abutments, Bearings an Barriers.After successful creation of Precast Girder 2 Span Straight Bridge Model using conventional method, we will learn how to make the same using Wizard method which is way more convenient and gets results with just few click and inputs. After that you can compare both models at your own convenience.Course conent:Lesson 0 Theory Getting StartedLesson 1 Introduction Lesson 2 Initiating Open Bridge Modler from Open Bridge Designer Lesson 3 User Interface Lesson 4 Importing .tin file (Terrain Model) Exercise : Precast Girder 2 Span Straight Bridge ModelLesson 5 Adding a bridge Model Lesson 6 Adding Support Lines Lesson 7 Adding Bridge Decks Lesson 8 Adding Girders Lesson 9 Placing and Modifying Pier Lesson 10 Placing Abutments Lesson 11 Placing Bearings and Stepped Cap Lesson 12 Placing Barriers Exercise : Precast Beam 2 Span Straight Bridge Model - Using WizardLesson 13 Adding Bridge Model Lesson 14 Place Excavation Lesson 15 Place Diaphragms

Overview
Section 1: Theory

Lecture 1 Theory

Section 2: Getting Started

Lecture 2 Introduction

Lecture 3 Initiating Open Bridge Modler from Open Bridge Designer

Lecture 4 User Interface

Lecture 5 Importing .tin file (Terrain Model)

Section 3: Exercise : Precast Girder 2 Span Straight Bridge Model

Lecture 6 Adding a bridge Model

Lecture 7 Adding Support Lines

Lecture 8 Adding Bridge Decks

Lecture 9 Adding Girders

Lecture 10 Placing and Modifying Pier

Lecture 11 Placing Abutments

Lecture 12 Placing Bearings and Stepped Cap

Lecture 13 Placing Barriers

Section 4: Exercise : Precast Beam 2 Span Straight Bridge Model - Using Wizard

Lecture 14 Adding Bridge Model

Lecture 15 Place Excavation

Lecture 16 Place Diaphragms

Civil eeers,BIM Modelers,Microstation and AutoCAD users,Draft modelers,Civil3D and Revit users

HomePage:

https://www.udemy.com/course/design-bridges-using-open-bridge-level-1/

DOWNLOAD
1dl

https://1dl.net/lnwnytmqrpjc/NGCjaJqc__Design_Bri.rar