Umts Rrm State

[LeeAndro]

Last updated 8/2020MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHzLanguage: English | Size: 491.20 MB | Duration: 1h 10m​

UMTS RRM Concepts

What you'll learn
Cell Search Procedure
PLMN Search, PLMN Selection & Cell Selection
Cell Selection (S Criteria) & Reselection Criteria (R criteria)
Location Registeration
RRC States, Periodic registeration,
IMSI Attach/ Detach
Cell Reselection with HCS
Paging in idle mode, Paging Occasions, Dedicated Paging
System Information Blocks in UMTS

Requirements
It would be recommended that the participant has attended UMTS Air Interface Course.
Understanding of 3G technology

Description
This course provides a learning path to understand the Radio Resource Management (RRM) functions in UMTS. RRM in UTRAN provides a means to manage (e.g., assign, reassign, and release) radio resources in single and multi-cell environments. Our main focus will be to understand the cell procedures which involves comprehending what actually happens when a User Equipment (UE) is switched on. Cell search Process : UE shall make measurements on all the frequency bands, synchronisation with the network follows, and Scrambling code selection process. Successful execution of the cell search and selection procedure as well as acquiring initial system information is essential for the UE before taking further steps to communicate with the network.PLMN Selection and Cell selection Process - Which involves selection of th PLMN and Cell selection using S- Criteria.Understanding the RRC states in UMTS - 3GPP has designed RRC to function in different modes: Idle and Connected. The connected mode is further categorized into four states: Cell-DCH, Cell-FACH, Cell-PCH and URA-PCH.Understanding the paging process in idle as well as connected mode : There are two kinds of paging messages in UMTS, Paging Type 1 and Paging type 2. Paging Type 1. This message will be sent to the UE, when UE is either in Idle State, Cell PCH State or URA PCH State.

Overview
Section 1: Overview

Lecture 1 Course Preview

Lecture 2 Overview & Objectives

Lecture 3 Cell Procedure

Lecture 4 PLMN Search

Lecture 5 PLMN Selection

Lecture 6 Cell Selection & Procedure

Lecture 7 Cell Selection Process

Lecture 8 Cell Selectioin Criterion S ( in the FDD Mode )

Lecture 9 Cell Selection When Leaving the RRC Connected Mode

Section 2: Basics

Lecture 10 Location Registration

Lecture 11 Cell Reselection in the RRC Idle and RRC Connected Mode

Lecture 12 Normal Location Update Procedure LUP

Lecture 13 Periodic Registration

Lecture 14 IMSI Attach/Detach

Lecture 15 RRC Model Diagram

Lecture 16 Hierarchical Cell Structures HCS

Lecture 17 Cell Reselection Without HCS

Lecture 18 Cell Reselection : Measurement Rules

Section 3: Intermediate

Lecture 19 Cell Reselection (W/O HCS) : R-Criterion

Lecture 20 Cell Reselection With HCS

Lecture 21 Cell Reselection With HCS : Measurement Rules

Lecture 22 Measurement Rules : HCS & Fast Moving UE's

Lecture 23 Cell Reselection : H-Criterion (Slow Moving UE)

Lecture 24 Cell Reselection With HCS : R-Criterion and TOn

Lecture 25 Paging

Lecture 26 Paging in Idle Mode

Lecture 27 Paging in Idle Mode and URA PCH

Section 4: Advanced

Lecture 28 Paging Occasions

Lecture 29 Dedicated Paging

Lecture 30 System Information

Lecture 31 System Information Block

Lecture 32 System Information Block 1 (SIB 1)

Lecture 33 System Information Block 6 (SIB 6)

Lecture 34 Cell Update

Lecture 35 URA Update

RF Eeers, UMTS Planners and Optimizers, Drive Test Eeers

HomePage:

https://www.udemy.com/course/umts-rrm-state/

DOWNLOAD
1dl

https://1dl.net/pud74os48drs/9SgdSI0J__UMTS_RRM_S.rar