Diy Lab Equipment With Arduino-Part 2-Temperature Control

[LeeAndro]

Last updated 11/2022MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHzLanguage: English | Size: 4.11 GB | Duration: 5h 30m

Measure and control temperature with OLED display and datalogging in SD card and Google sheet

What you'll learn
Learn different types of temperature sensors and where to use each type.​

Measure temperature with Arduino/ESP32, record data in SD card, display on OLED and send to Google sheet.
Learn different methods for heating and cooling using off-shelf low-cost components.
Build complete temperature control system with minimal programming knowledge.
Learn how to utilize available resources (codes from examples and internet) and fit them into your project.

Requirements
Basic programming skills using Arduino IDE.
Basic knowledge about Arduino hardware.

Description
This is the second course in the DIY Lab Equipment with Arduino series. After we learnt the basics in the first course, now we APPLY the knowledge to measure and control the temperature for our expent setup or project. Temperature is essential in almost any expent and it is important to record it continuously. This is why we directly employed SD card module to save the records so that we can retrieve them and put them in Excel for example. We also included how to send the data to Google sheet so that online monitoring can be done anywhere. We also added OLED display to show the measurements so that the system can be used easily independent from the computer.After learning temperature measurement, we moved to explain different ways of heating and cooling. We made a complete setup to measure the temperature and use it to control heating and cooling of water as an example of expent setup. We employed PWM to precisely control the temperature. Similar setup can be applied in different ways to fit to our expent. Like other course, we use off-shelf components that are readily available at low cost.During this course, we practice how to utilize available codes from the internet or library examples and fit them in our project with minimal coding experience. If you have no knowledge about coding and Arduino, it is highly advised to take the first course (DIY Lab Equipment with Arduino-Part 1-The basics).In the next course we will learn about liquid handling that includes the properties and use of different pumps and how to make your own pump to use it to control liquid transfer.

Overview
Section 1: Measuring Temperature with Arduino Uno/ESP32 and analog/digital sensor

Lecture 1 Types of temperature sensors

Lecture 2 Measuring temperature with thermistor using Arduino Uno

Lecture 3 Measuring T with thermistor using Arduino Uno: Adding calibration

Lecture 4 Adding SD card: Making T data logger using Arduino Uno

Lecture 5 Moving to ESP32: Measuring T with thermistor using ESP32

Lecture 6 Making temperature data logger using ESP32 and SD card

Lecture 7 Adding IoT: Recording data in Google sheet

Lecture 8 Measuring T with DS18B20 digital T sensor using ESP32

Lecture 9 Calibrating thermistor with DS18B20 sensor and ESP32

Lecture 10 Adding display (OLED) to your project

Lecture 11 Adding the real and date to your project: working with RTC module

Section 2: Measuring Temperature with Other Temperature Sensors

Lecture 12 Using LM35 temperature sensor with Arduino Uno

Lecture 13 Using LM35 temperature sensor with ESP32 (unsuccessful)

Lecture 14 Measuring T using non-contact IR temperature sensor and ESP32

Lecture 15 Using thermocouple MAX6675 temperature sensor with Arduino Uno and E

Lecture 16 Measuring Temperature&Humidity using DHT11 and DHT22 with ESP32

Section 3: Controlling Temperature using Arduino and heatiooling modules/methods

Lecture 17 Heating and cooling methods and modules

Lecture 18 Controlling temperature using relay - Make water bath with heating element

Lecture 19 Controlling temperature using relay - Make water bath with heating pad

Lecture 20 Controlling temperature using MOSFET - water bath with heating pad

Lecture 21 Controlling temperature using MOSFET - more advanced temperature controls

Lecture 22 Making cold water bath (chiller) using off-shelf resources

Students and researchers looking to add temperature measurement or control to the expents.,Non-eeers looking to utilize available off-shelf heating and cooling modules.,Chemistry, biology, physics, biomedical, medical, pharmaceutical lab students, researchers and staff who need to make DIY equipment

HomePage:

https://www.udemy.com/course/diy-lab-equipment-with-arduino-part-2-temperature-control/

DOWNLOAD

https://1dl.net/d40rpq8yrxs7/ZMCLNXAD__DIY_Lab_Eq.part1.rar.html
https://1dl.net/u1gvnzhrgl6m/ZMCLNXAD__DIY_Lab_Eq.part2.rar.html
https://1dl.net/wnk7esa2hgvt/ZMCLNXAD__DIY_Lab_Eq.part3.rar.html
https://1dl.net/iqas2uy0i6mf/ZMCLNXAD__DIY_Lab_Eq.part4.rar.html
https://1dl.net/m32xpe46s0pm/ZMCLNXAD__DIY_Lab_Eq.part5.rar.html