3G Optimization Basics

[LeeAndro]

Last updated 7/2020MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHzLanguage: English | Size: 682.10 MB | Duration: 1h 20m​

3G Optimization Principles

What you'll learn
This course of 3G optimization covers the description of
3G Optimization Process
3G Key performance Indicators
Call Flows
Network's Coverage Analysis
Idle Mode and Connected Mode Behaviour
Analysis of Different Issues ; Call Drop, Throughput
Coverage and Capacity Improvement Solutions

Requirements
It is recommended that the Participant has basic knowledge of 3G Fundamentals & 3G air Interface and Call Flows.

Description
The Telecom optimization process is an ongoing process in which the first step is to collect data using the Drive test (DT). Through DT, different Key Performance Indicators (KPI's) are checked and monitored so as to Detect problems in a network. There are multiple metrics like call drop rate, call failure rate, handover failure rate, handover success rate, etc. available which will detee what type of optimization is needed: Physical or parameter. Physical optimization includes tilt adjustments etc. The optimization process includes both Coverage and Capacity. This course of UMTS optimization covers the description of optimization of networks, coverage analysis, throughput analysis, etc. Optimization process - includes pre-optimization process, RF optimization, service optimization (AMR), service optimization (CS and PS), commercial launch, and continuous optimization. RF optimization mainly focuses on RF configurations like Frequency, Bandwidth, defining parameters for idle mode (Cell selection, Reselection), and Dedicated mode and further refining it further on the basis of results.To summarize, we will cover the description of optimization of networks, coverage analysis, throughput analysis, etc. We will also have a look at the principles and techniques that relate to the parameters available in 3G UMTS mainly cell configurations, idle mode, connected mode parameters, key performance indicators. We will dig into various optimization solutions, analyze radio and call drop issues, and various coverage improvement techniques. In all, this course will help you to learn various problems and solutions to the issues in the UMTS network.

Overview
Section 1: 3G Optimization Basics - Part 1

Lecture 1 3G Optimization Overview

Lecture 2 Introduction

Lecture 3 Call Flow

Lecture 4 Mobile Originating Call - Part 1

Lecture 5 Mobile Originating Call - Part 2

Lecture 6 Drive Test

Lecture 7 Drive Test Equipments

Lecture 8 Window Used in WCDMA Drive Test

Lecture 9 Drive Test Tools Configuration

Lecture 10 Drive Test Routes

Lecture 11 Optimization and Overview

Section 2: 3G Optimization Basics - Part 2

Lecture 12 Lecture 1 : 3G Optimization Flow

Lecture 13 Lecture 2: Network Optimization Phases - Flow Chart

Lecture 14 Lecture 3: Single Site Verification

Lecture 15 Lecture 4: Flow Chart of Single Site Verification

Lecture 16 Lecture 5: Physical Audit

Lecture 17 Lecture 6: Verification in Idle Mode

Lecture 18 Lecture 7: Scramble Code Check

Lecture 19 Lecture 8: LAC/RAC Check

Lecture 20 Lecture 9: Near Site Test

Lecture 21 Lecture 10: Verification in Connected Mode

Section 3: 3G Optimization Basics - Part 3

Lecture 22 Lecture 1: Originating and Teating Connection Test of VP Service

Lecture 23 Lecture 2: Connection Test of PS Services

Lecture 24 Lecture 3: Antenna Diversity Check

Lecture 25 Lecture 4: RF Optimization - Overview

Lecture 26 Lecture 5: Process

Lecture 27 Lecture 6: Key Performance Indicators

Lecture 28 Lecture 7: Targets

Lecture 29 Lecture 8: Data Collection

Lecture 30 Lecture 9: Coverage Analysis

Lecture 31 Lecture 10: Coverage Analysis Processes

Section 4: 3G Optimization Basics - Part 4

Lecture 32 Lecture 1: Pilot Coverage Strength Analysis (RSCP)

Lecture 33 Lecture 2: Pilot Coverage Quality Analysis (Ec/Io)

Lecture 34 Lecture 3: Downlink Coverage Analysis

Lecture 35 Lecture 4: Analyzing Primary Pilot Cell

Lecture 36 Lecture 5: Analyzing Comprasion of UE and Scanner Coverage

Lecture 37 Lecture 6: Uplink Coverage Analysis

Lecture 38 Lecture 7: Distribution of UE Transmit Power

Lecture 39 Lecture 8: Pilot Pollution

Lecture 40 Lecture 9: Judgement Standards

Lecture 41 Lecture 10: Causes

Section 5: 3G Optimization Basics - Part 5

Lecture 42 Lecture 1: Pilot Pollution Problem Analysis

Lecture 43 Lecture 2: Solutions of Pilot Pollution

Lecture 44 Lecture 3: Dropped Call Analysis

Lecture 45 Lecture 4: Call Drop Cases

Lecture 46 Lecture 5: Drop Due To Missing Neighbor

Lecture 47 Lecture 6: Drop Due To DL Poor Coverage

Lecture 48 Lecture 7: Session Error Due To Poor DL Coverage

Lecture 49 Lecture 8: Handover Analysis

Lecture 50 Lecture 9: Parameters Optimization

Lecture 51 Lecture 10: Drive Test

Section 6: 3G Optimization Basics - Part 6

Lecture 52 Lecture 1: Drive Test Data Analysis

Lecture 53 Lecture 2: Adjustment Recommendation and Implementation

Lecture 54 Lecture 3: Test For Special Areas

Lecture 55 Lecture 4: Optimizaiton Report

Lecture 56 Lecture 5: Summary of Optimization Solutions

Radio Network Optimizer, Telecom Professional, Drive Test Eeers.

HomePage:

https://www.udemy.com/course/3g-optimization-basics/

DOWNLOAD
1dl

https://1dl.net/kwqng62ziviz/x5Fj4ppu__3G_Optimiz.rar